IROAD DASH CAM FX1

Features

LONG DRIVE RECORDING WITH

HYPER LAPSE
No more worries about missing out while driving long-distance By compressing the recorded video, Hyper Lapse minimizes the memory space and saves 4 times more footage. However, when an event or impact occurs, recording frame rate switches automatically to 30 fps to provide clearer images of important moments.

LONG PARKING RECORDING WITH

TIME LAPSE
Experience continuous Parking Mode recording for a long time with IROAD Time Lapse. Time Lapse is a low-capacity recording method that minimizes the storage space by compressing and saving at 1fps while in Parking Mode. On the other hand, when an impact or motion is detected during Parking Mode, it switches automatically to 30 fps to provide clearer images of important moments.

PARKING MODE: NORMAL
CAPACITY: 32GB
FPS: 30 fps
RECORDING TIME: About 4H

PARKING MODE: TIME LAPSE
CAPACITY: 32GB
FPS: 1 fps
RECORDING TIME: About 48H

1080P FHD 1CH

HIGH DEFINITION VIDEO QUALITY
CMOS Image Sensors allow constant FHD 1080p Front recording during both daytime and nighttime along with a 140-degree wide angle lens view. This will minimize blind spots to assure recording of all events without fail.

NIGHTTIME PICTURE QUALITY CORRECTION

NIGHT VISION
Videos recorded by a dash cam in low light environments such as dark alleyways or underground parking lots can pose difficulties when you try to accurately identify information from the image.IROAD NIGHT VISION employs the new ISP (Image Signal Processing) technology and the real-time image processing function to provide brighter images than our earlier models when recording at nighttime during Parking Mode.

LIGHT EXPOSURE

AUTOMATIC EXPOSURE
Sudden light exposure while driving, such as strong direct sunlight or the light of incoming vehicles at night, can sometimes affect your vision and make it difficult to assess the situation. The IROAD FX1 dash camera automatically adjust the amount of light exposure to provide bright and clear images in any situation.

VARIOUS AUTONOMOUS RECORDING MODES

CONTINUOUS RECORDING MODE: This mode is activated automatically when you start the engine. Recorded videos are saved in one-minute segments with an auto-looping mechanism.

EVENT RECORDING MODE :It will automatically start an Event recording when motion or impact is detected around the vehicle during both parking and driving mode.M

MANUAL RECORDING :Generate Event files on request when witnessing a traffic incident or something interesting on the road that you want to make sure you catch on camera. When pressing the Manual Recording button, the dash cam records and separately stores a few seconds of footage before (5-10s) and after (15-20s) that moment as a Manual Recording file protected from overwriting (limit before overwriting: up to max. 4% of total SD card storage).

PARKING IMPACT BUFFERED RECORDING: WhenParking Mode, the built-in G sensor detects when an impact with the vehicle has occurred, for which the dash cam generates an event file stored separately, protected from overwriting (if SD card storage is assigned to Event files through the dash cam settings). The saved video will include a few seconds before the impact occurred (5-10s) and a few seconds after (15-20s). This can be turned ON regardless of the Parking Mode used (Time-lapse or Motion Detection).

TIME-LAPSE PARKING MODE: The dash cam will continuously record at 1fps during Parking Mode. If Parking Impact is turned ON, the frame rate will briefly switch from 1fps to 30fps when recording the impact, then the dash cam will continue recording at 1fps.

MOTION DETECTION PARKING MODE: The dash cam stays “asleep” until it detects movement around the vehicle. In this mode, any motion happening around the vehicle in recorded in an event file stored separately. The saved video will include a few seconds before the motion was detected (5-10s) and a few seconds after (15-20s).

WIDE VIEWING ANGLE

140º WIDE ANGLE LENS
The 140 ° angle lens offer a wide angle of view and minimize blind spots, ensuring all scenes that can be seen through the front windshield are completely recorded.

PARKING MODE WITH MINIMUM POWER CONSUMPTION

ENERGY SAVING 2.4W
In parking mode, power consumption is greatly reduced to maximize recording time. In addition, to protect the vehicle battery, the dash cam automatically powers off when the vehicle battery voltage falls below a certain set value (Battery Discharge Prevention).

HIGH DURABILITY

HIGH-TEMPERATURE PROTECTION
The FX1 models are built to endure both high and low temperatures in order to keep the device running smoothly. The high-temperature protection function makes the device automatically turn off in case of overheating, protecting both the device and the stored data.

HIGH-EFFICIENCY VIDEO CODING FORMAT

FORMAT FREE 2.2
The 2022 newly released IROAD FX1 dash cams use a new file format which allows for a higher compression rate, uses memory space more efficiently and provides outstanding image quality.Format Free 2.2 is a server storage technology developed by IROAD that maximizes the life span, stability and efficiency of memory cards.

SPECIFICATIONS

MODEL: IROAD FX1

RESOLUTION / FRAME RATE
1080p Full HD @ 30fps * Hyper-Lapse(Driving Mode) @ 1fps / Time-Lapse(Parking Mode) @ 1fps * Frame rate may vary during Wi-Fi streaming.

IMAGING SENSOR: CMOS Sensor (Approx. 2MP) 1/2.8 inch

VIEWING ANGLE
Front: Diagonal 140°, Horizontal 116°, Vertical 61°

GPS: Built-in GPS

WI-FI: External(2.4GHz)

IMPACT SENSOR: 3-Axis Accelerometer G-Sensor (3D, ±3G)

ADAS 2.0: LDWS(Lane Departure Warning System) FVDW(Front Vehicle Departure Warning) FCWS(Forward Collision Warning System)

RECORDING MODES:
Driving Recording (Continuous) Impact Recording, Parking Mode (Impact Recording + Motion Detection / Time-lapse) Manual Recording, Audio Recording

CAPACITY: microSD card up to 256GB

VIDEO:
FORMAT FREE 2.2
YES (Adaptive)

LED INDICATORS: Front: Rec LED, GPS LED, Wi-Fi LED, Security LED

OPERATION TEMPERATURE: 20℃ – 70℃ (-4°F – 158°F)

STORAGE TEMPERATURE: – 20℃ – 80℃ (-4°F – 176°F)

HIGH TEMP CUT OFF: Approx. 70℃ (158°F)

INPUT POWER: DC 12V~24V / DC 5V

CERTIFICATIONS: FCC, CE, RoHS, IC

PRODUCT DIMENSIONS:
Front: W 108.2 mm x H 57 mm x D 32.9 mm (Weight 100g)

SOFTWARE: IROAD X-View (PC) – Windows 7 or higher and Mac (OS X 10.7 64Bit) or higher

APPLICATION: IROAD X-View (Mobile) – Android 6.0, IOS 10.0 or higher : Firmware update supported

IROAD DASH CAM FX1

Contact Us Today